Baseline Classroom with Projector

Classroom Features, Technology Instructions, and Teaching Tips

Typical Room View

For precise room capacity and photos showing the furniture and layout of your exact classroom, please log in to 25 Live.

  • 25 Live
  • FAQs and Troubleshooting

  • Teaching Tips

    If you want to...Consider active learning activities such as...Use low technology options like...
    Check understanding
  • Minute paper: Students write for two minutes in response to a question.

  • Muddiest point: Students identify unclear concepts from lecture.
  • Having students use a piece of their own paper.

    Supplying an index card for responses.
    Encourage group discussion
  • Jigsaw: Students assigned to different areas of expertise teach others in a different group.
  • Having students work with other students in the same row or on either side of them.
    Model problem solving
  • Incomplete problem: Start working on a problem and have students finish it.
  • Having students work on a shared document that is then projected.
    Engage in interactive lecture
  • Study guide: Outline main ideas from lecture or reading on a shared document.

  • Think-Pair-Share: Students formulate a response, share ideas with another student and share with the entire class.
  • Having students work on a shared document that is then projected.

    Supplying an index card for responses.
    Co-create learning experience in the classroom
  • Multimedia poster: Students create a poster with media and text for digital display.
  • Having students work with other students in the same row or on either side of them.

    Having students undertake peer review in Blackboard or Padlet.
    Encourage peer instruction
  • Multimedia poster: Students create a poster with media and text for digital display.
  • Having students create digital presentations outside of class that are then projected.
    Show real world application
  • Case study: Students work in groups to solve a real-life scenario.
  • Having students use class time to work on a solution to the problem and give progress reports.

    Classroom Features

    Show All | Hide All

    Touch panel controller

    Use this Feature to Support Active and Engaged Learning

    1. Leave the lectern: Although you can adjust the display and keyboard to allow you to sit or stand behind the lectern as you present information, this classroom has been designed specifically to encourage additional learning modes. As you plan each class session, you might envision other places in the room where you can stand or sit as you speak with, listen to, or observe your students in their learning.
    2. Support group interaction: Switch to Group mode so that clusters of students can work on their own parts of a project on a nearby screen. Groups could project a shared document or Blackboard wiki as they all type; a single student's draft they are reviewing together; a problem or selection of text they are working on together.
    3. Go beyond Powerpoint: Switch to the document camera to work problems by hand on a notepad without turning your back to reach the whiteboard, or to show students a 3-D object up close (geological sample, artifact, small machine).
    4. For more teaching tips and examples, visit the Stearns Center’s Active Learning page.

    Technology Instructions

    1. Touch the panel screen on the console to start the system. In most classrooms, the display screen(s) will automatically turn on.
    2. Tap to select the appropriate source button for viewing.
    3. Other source options may include document camera, laptop, and/or wireless depending on the room options.
    4. See panel screen for volume control and screen-blanking options.
    5. For details on the usage and capabilities of the touch panel controller, please watch the tutorial video

    PC with annotation monitor

    Use this Feature to Support Active and Engaged Learning

    1. Model thinking and problem solving: Use the monitor to solve problems, annotate texts, or draw a diagram in real-time, while sharing your thought process: Turn the screen flat, open a whiteboard in Ink2Go to write or draw. Or ask a student to come up and model the work for the class. You can also then save the document and post it for your students to review later.

    Technology Instructions

    1. If the PC is not already on, check that the touch panel is powered on, press the computer power button, or call support: 703-993-3456.
    2. Log in with MESA: Use your Mason username and password for MESA access.
    3. To use Ink2Go to annotate electronic documents, to capture snapshots or video of your screen, or to work on live whiteboards and save that work, see additional information here.

    Laptop or tablet connection

    Use this Feature to Support Active and Engaged Learning

    1. Reporting out from in-class activities: Invite individual students or teams to connect their devices to the console to share the results of an in-class activity. After in-class work, not all participants or teams need to report out (this can get tedious), but asking a few to share increases accountability and helps spark discussion about the range of appropriate and innovative responses.
    2. Sharing student work and peer review: Invite individuals or teams to connect their devices to share in-progress drafts of their research, designs, lab reports, or problem sets. Students who present informally and take questions gain confidence and may gain helpful feedback or insight; more importantly, others in the class see real-time problem-solving from their peers and are often reassured that not everyone gets it right the first time. Help students focus their comments on how the document/problem could be improved and what they themselves can learn from it (rather than commenting on the abilities of the student presenting).
    3. For more teaching tips and examples, visit the Stearns Center’s Active Learning page.

    Technology Instructions

    1. Locate the HDMI cable on top of the instructor console. (It may be located in the cable cubby.)
    2. Place the HDMI cord into the HDMI port on your device or the adapter. (If you do not have an HDMI port, you will need an adapter. If you are using an adapter, plug the adapter into your device.)
    3. Press the “HDMI” button on the touch panel controller to display your device’s screen. (The touch panel interface will indicate the selected source.)
    4. To troubleshoot issues related to sound and/or image display, see the FAQ page.

    Document camera

    Use this Feature to Support Active and Engaged Learning

    1. Share your students’ finds: Remember that the doc cam can project a view from a student’s phone or tablet (though with varying image quality) and three-dimensional items as well as papers; your students’ backpacks and devices may have examples they can quickly share with the class using the doc cam. Using student examples can help strengthen connections between abstract concepts and their lived experience.
    2. Modified “gallery walk”: In a typical "gallery walk" exercise in a classroom with extended whiteboards, a team member can be selected to guide other students through the solution the team posted on the board as they move around the room. Here, using the doc cam, one or two students can bring a written record up to explain to the whole class; if the instructor selects these students at random, then all team members are always accountable for being ready to explain their team’s progress. Explaining and watching others explain the steps that led to a solution is a crucial element in retaining and transferring new knowledge.
    3. For more teaching tips and examples, visit the Stearns Center’s Active Learning page.

    Technology Instructions

    1. Press the “DOC CAM” button on the touch panel controller to select the document camera as the source.
    2. Place the item on the white square or clear surface--the document should be placed face-up.
    3. For capturing photos and recording videos of your item, insert a USB device into the USB port on the document camera. Press the capture/delete button on the document camera’s control panel to capture a picture of the displayed image.
    4. Note: Only select document cameras support this functionality. For more tips and instructions, visit the Stearns Center’s Document Camera page.

    Display screen(s)

    Use this Feature to Support Active and Engaged Learning

    1. Alternate between lecture and discussion: Allow students to maintain focus on your key information while also keeping eye contact with their group members.
    2. Support group interaction: Switch to Group mode so that clusters of students can work on their own parts of a project on a nearby screen. Groups could project a shared document or Blackboard wiki as they all type; a single student's draft they are reviewing together; a problem or selection of text they are working on together.
    3. Broadcast directions or updates: Modify the slide you've broadcast to provide updates -- or answers to questions that come up -- to the instructions for group work that all students can check from their group.

    Technology Instructions

    1. Touch the panel screen on the console to start the system. In most classrooms, the screen(s) will automatically lower.
    2. Tap to select the appropriate source button for viewing.
    3. Other source options may include document camera, laptop, and/or wireless depending on the room options.
    4. See panel screen for volume control and screen-blanking options.